[News] Gearing up for Backside Power Delivery: Heated Tech War Between TSMC, Intel, and Samsung

---

---

As Moore’s Law progresses, transistors are becoming smaller and denser, with more layers stacked on top of each other. This may require passing through 10 to 20 layers of stacking to provide power and data signals to the transistors below, leading to increasingly complex networks of interconnects and power lines. Simultaneously, as electrons transmit downward, IR drop phenomena occur, resulting in power loss.

Apart from power loss, the occupation of space by power supply lines is also a concern, which often occupies at least 20% of resources. Addressing the issue of signal network and power supply network resource contention to miniaturize components becomes a major challenge for chip designers. As per a report from TechNews, this has led the semiconductor industry to begin shifting power supply networks to the backside of chips.

• TSMC’s Super Rail Technology Set to Revolutionize Chip Efficiency with A16 Process Node Debut in 2025

Leading semiconductor foundry TSMC recently unveiled its A16 process at a technical forum in North America.

This new node not only accommodates more transistors, enhancing computational efficiency, but also reduces energy consumption. Of particular interest is the integration of the Super PowerRail architecture and nanosheet transistors in the A16 chip, driving the development of data center processors that are faster and more efficient.

Notably, TSMC’s A16 employs a different chip wiring manner, with power wires delivering electricity to transistors located beneath rather than above them, known as backside power supply, facilitating the production of more efficient chips.

In fact, one of the methods to optimize processors is to alleviate IR drop, a phenomenon that reduces the voltage received by the transistors on the chip, consequently affecting performance. The A16 wiring is less prone to voltage drops, simplifying power distribution and allowing for tighter chip packaging, aiming to accommodate more transistors to enhance computational capabilities.

Additionally, TSMC’s A16 process technology directly connects the power transmission lines to the source and drain of the transistor, which improves chip efficiency.

Using the Super PowerRail in A16, TSMC achieves an 10% higher clock speed or a 15% to 20% decrease in power consumption at the same operating voltage (Vdd) compared to N2P. Moreover, the chip density is increased by up to 1.10 times, supporting data center products.

• Intel’s PowerVia Set for Production on Intel 20A in 2024

Similar to TSMC’s Super PowerRail, Intel has also introduced its backside power delivery solution, PowerVia.

According to Intel, power lines typically occupy around 20% of the space on the chip surface, but PowerVia’s backside power delivery technology saves this space, allowing  more flexibility in the interconnect layers.

In addition, the Intel team previously created the Blue Sky Creek test chip to demonstrate the benefits of backside power delivery technology. Test results indicated that most areas of the chip achieved over 90% cell utilization, with a 30% platform voltage droop improvement, 6% frequency benefit, increased unit density, and potential cost reduction. The PowerVia test chip also exhibited excellent heat dissipation properties, aligning with expectations for higher power density as logic shrinks.

Furthermore, PowerVia is slated to be integrated into Intel Foundry Services (IFS), enabling faster achievement of product efficiency and performance enhancements for customer-designed chips.

According to official documentation from Intel, the tech giant plans to implement PowerVia on Intel 20A process technology along with the RibbonFET architecture for the full-surround gate transistor. Production readiness is expected in the first half of 2024, with initial steps being taken at the fabrication plant for future mass production of client ARL platforms.

• Samsung Plans to Implement SF1.4 Process by 2027

In addition to leading the transition to GAA transistor technology, Samsung, another competitor of TSMC, is also wielding its Backside Power Delivery Network as a key weapon in the pursuit of advanced processes.

According to a previous report from Samsung, Jung Ki-tae Jung, Chief Technology Officer of Samsung’s foundry division, announced plans to apply the backside power delivery technology to the 1.4-nanometer process by 2027.

Reports from Korean media outlet theelec indicate that compared to traditional front-end power delivery networks, Samsung’s backside power delivery network successfully reduces wafer area consumption by 14.8%, providing more space on the chip to accommodate additional transistors, thereby enhancing overall performance.

Additionally, wiring length is reduced by 9.2%, aiding in resistance reduction to allow more current flow, leading to lower power consumption and improved power transmission conditions. Samsung Electronics representatives noted that the mass production timeline for semiconductor chips adopting backside power delivery technology may vary depending on customer schedules, and Samsung is currently investigating customer demand for the application of this technology.

Read more

• [News] More Complex than Intel’s? TSMC’s Super PowerRail – Elevating Chip Performance through Advanced Power Delivery
• [News] Battle of the Titans in the Angstrom Era – TSMC’s A16 Competes with Intel’s 14A and Samsung’s SF1.4