Intel and AMD will be releasing new CPUs that support DDR5 DRAM solutions for PCs and servers this year. In response, the DRAM industry led by South Korean suppliers is developing solutions to complement the arrival of the new CPUs. In the midst of the gradual shift to DDR5, DRAM suppliers will also scale back the supply of DDR3 solutions, according to TrendForce’s latest investigations. With Korean suppliers accelerating their withdrawal from DDR3 production, Taiwanese suppliers yet to kick off mass production using newly installed capacities, and Chinese suppliers falling short of their expected yield rate, the global supply of DDR3 solutions will undergo an impending decline. With respect to the demand side, however, not only has the supply of networking chips been ramping up, but material shortage issues are also gradually easing. As such, buyers are now procuring DDR3 solutions ahead of time, resulting in a tight supply and demand situation in the DDR3 market. TrendForce therefore expects DDR3 DRAM prices to recover from a bearish first quarter and undergo a 0-5% QoQ increase in 2Q22.

On the supply side, Samsung and SK hynix have begun scaling back their DDR3 production while also planning to declare EOL (end of life) for their DDR3 offerings, such as 1/2Gb and 4Gb chips. It should be noted, however, that Micron’s DDR3 solutions will not reach EOL even by 2026, meaning the company will still offer DDR3 solutions long after its two Korean competitors have stopped doing so, according to TrendForce’s understanding. Also worth noting is that Micron is migrating its DDR3 production to a US-based fab that mainly manufactures specialty DRAM solutions. Nevertheless, since this fab’s production capacity will be divided between products for consumer and automotive applications, TrendForce believes that the aforementioned migration will tighten Micron’s supply of consumer DRAM solutions because the US fab will give priority to automotive DRAM solutions that offer a higher gross margin and are currently enjoying surging demand.

Although Taiwan-based DRAM suppliers that focus on promoting DDR3 solutions, namely, Nanya Tech and Winbond, are in the process of capacity expansion, their new production lines will not be operational until 2023-2024. Hence, the contribution from the newly added capacities is not expected to drive up DDR3 supply substantially this year. Chinese suppliers, including CXMT and GigaDevice, are continuing to collaborate in DDR3 development, though their capacity increases and yield rate improvements have both fallen short of market expectations. After being added to the Entity List, JHICC, yet another China-based DRAM supplier, is now dealing with severe restrictions with respect to procuring equipment, making it difficult for JHICC to raise its wafer input. Furthermore, the company has no spare resources that can be allocated to R&D and pilot runs. As a result, JHICC still primarily manufactures DDR4 4Gb chips at its initial 25nm node, with no DDR3 production at the moment.

With regards to demand, DDR3 consumer DRAM is primarily used in end-devices such as STBs and networking products (e.g., GPON, routers, and modems), which do not require high-performance SoCs. While the foundry industry suffered a severe shortage of wafer capacities allocated to logic ICs in 4Q21, production capacities for relatively low-margin chips were noticeably impacted in turn. Along with a preexisting component mismatch situation, most manufacturers found themselves unable to assemble end-devices. Moving into early 2022, however, the supply of certain materials, including those used in foundry operations, saw a gradual improvement. As various components needed for device manufacturing became available after Lunar New Year, certain buyers have once again kicked off their consumer DRAM procurement activities.

In addition, DRAM spot prices shifted from a prior decline to a strong upturn at the end of last year as the Chinese government ordered a month-long lockdown in Xi’an. The ensuing price hike, which has lasted for two months, subsequently led buyers to procure even more DRAM ahead of time in anticipation of further price hikes. Hence, although the demand for end-products has yet to make a full recovery, buyers are now slowly and steadily procuring consumer DRAM in order to avoid either higher upcoming prices or even an inability to secure consumer DRAM inventory.

In 4Q21, NAND Flash bit shipments grew by only 3.3% QoQ, a significant decrease from the nearly 10% in 3Q21, according to TrendForce’s investigations. ASP fell by nearly 5% and the overall industry posted revenue of US$18.5 billion, a QoQ decrease of 2.1%. This was primarily due to a decline in the purchase demand of various products and a market shift to oversupply causing a drop in contract prices. In 4Q21, with the exception of enterprise SSD, the supply of which was limited by insufficient upstream components, the prices of other NAND Flash products such as eMMC, UFS, and client SSD, all fell.

TrendForce’s summary of NAND Flash market sales performance in 2021 is as follows: although there have been signs of weakening since 2H21, thanks to remote services and cloud demand driven by the pandemic, revenue performance still grew significantly compared to 2020. Revenue reached US$68.6 billion, up 21.1% YoY, the second-biggest increase since 2018.

NAND Flash revenue fell for most manufactures in 4Q21 due to PC OEM destocking

There were some changes to the top three NAND Flash revenue rankings in 4Q21 compared 3Q21, Samsung and Kioxia remained in the top two while third place was replaced by Western Digital (WDC). Although there was still demand coming from data centers, as PC OEMs continued to deplete client SSD inventories and demand from China’s smartphone market weakened, stocking momentum was affected by component mismatch issues, resulting in a decline of approximately 5% in Samsung Electronics’ bit shipments in 4Q21. After the market shifted to oversupply, ASP also fell by approximately 5%, leading to Samsung Electronics posting 4Q21 revenue of US$6.110 billion, a QoQ decrease of 6.1%.

Second ranked Kioxia continued seeing strong demand from data center clients in 4Q21 but this was offset by inventory adjustment and reduced purchasing on the part of PC OEMs. Bit shipments declined slightly by 1% and ASP remained flat even in the face of weakening market demand, which was better performance than that of other suppliers in the same period. Revenue in 4Q21 reached US$3.543 billion, a QoQ decrease of 2.6%.

WDC was another company that benefited from continued strong stocking demand from major US smartphone clients for new 5G flagship phones which offset the impact of weak client and enterprise SSD sales, for bit shipment growth of 13%. However, as the proportion of consumer goods grew, ASP declined by 6%. WDC’s NAND Flash division posted 4Q21 revenue of US$2.62 billion, a QoQ increase of 5.2%.

Benefiting from continued stocking from data center clients and US-based smartphone brands, SK hynix’s bit shipment growth remained above 10%, in line with original forecasts. However, ASP was affected by weaker mobile phone shipments in China and inventory adjustment at PC OEMs. Pricing fell by nearly 10% which offset overall growth momentum. Revenue posted by SK hynix’s NAND Flash division in 4Q21 increased by 2.8% to US$2.615 billion.

Micron was similarly affected by inventory adjustments undertaken on the part of PC OEMs and data center clients.  Although Micron’s 176-layer products continue to be adopted, shipments in 4Q21 were flat compared to 3Q21 and ASP fell approximately 5% as the growth rate of supply outpaced demand, leading to a decline of 4.7% in Micron’s 4Q21 NAND Flash revenue to US$1.878 billion.

Solidigm’s 4Q21 production capacity was still being affected by the impact of supply chains (such as PMIC supply) on enterprise SSD, resulting in a continued decline in bit shipments of nearly 5% in 4Q21. At the same time, while orders for laptops are still strong, Solidigm actively increased bits shipments of PC QLC SSDs in order to reduce production capacity, causing a drop in ASP and a 4Q21 NAND Flash revenue performance of only US$996 million, a 9.9% decline.

Looking forward to 1Q22, TrendForce states that with the advent of the demand off-season, demand for major applications will show a seasonal decline, exacerbating the phenomenon of oversupply and driving the contract price of products to fall further. Falling prices and shrinking volume is expected to further reduce the revenue level of the NAND Flash industry. Referencing information released by TrendForce on Feb. 10, it is worth noting that market expectant psychological factors in 2Q22 generated from the previous Kioxia and WDC raw material pollution incidents will change the supply and demand situation after February and certain products with additional orders and non-quarterly contract prices will immediately reflect a pricing increase. This will help reduce the decline in the output value of NAND Flash in 1Q22.

The pandemic has impeded the supply of many end-user devices such as smartphones, servers, PCs, and niche consumer electronics components, indirectly leading to a decline in a willingness on the procurement-end to stock relatively abundant memory chips, according to TrendForce research. This is most obvious in the stance of PC OEMs holding more than 10 weeks or more of DRAM inventory. Therefore, most DRAM fabs experienced a drop in shipments in the fourth quarter of 2021 and declining purchasing momentum has also led to a downward trend in DRAM price quotations. Total 4Q21 DRAM output value decreased by 5.8% QoQ, reaching US$25.03 billion, with only a few suppliers such as SK hynix bucking this trend.

Looking forward to 1Q22, although material shortages for some components can be alleviated, the first quarter is already an off season for demand and buyers’ inventories are still flush. Thus, the purchasing-side will largely concentrate on destocking, with overall purchasing momentum remaining sluggish. Thus, DRAM pricing in the first quarter of this year is expected to face greater pressure than in the fourth quarter of last year and overall DRAM output value may fall further.

4Q21 DRAM price drop causes downturn in manufacturer profit levels

In terms of revenue performance, price quotations from the three major DRAM manufacturers all declined with slightly differing shipments trends. Shipments from both Samsung and Micron fell due to poor end-user demand, with revenue down 9% and 8%, respectively. In terms of market share, Samsung dropped slightly to 42.3% while still ranking first, SK hynix climbed to nearly 30%, ranking second, and Micron dropped slightly to 22.3%.  Pricing gaps between these three DRAM manufacturers in 1Q22 is expected to be narrow, but since SK hynix had a relatively high base period of shipment in the 4Q21, the company expects a decline in its shipments slightly higher than the industry average which will reduce its 1Q22 market share slightly.

In terms of profit performance, the operating profit margins of Samsung, SK hynix, and Micron (September-November financial reporting) fell to 50%, 45%, and 41%, respectively, due to the cost optimization resulting from an increase in the proportion of advanced processes not being  enough to make up for the decline in price quotations. TrendForce believes that the downturn trend in profit margins is likely to intensify in 1Q22 and DRAM suppliers will face sharper profit decline. Manufacturers can only increase the proportion of advanced processes and optimize their product portfolio to reduce the impact brought on by price pressure.

Specialty DRAM market conditions also weak in 4Q21, with Taiwanese manufacturer revenue falling as well

As the demand for specialty DRAM end-user applications such as TVs and consumer electronics products dropped significantly in 4Q21, coupled with the impact of material shortages in the supply chain, client demand for DRAM shipments also cooled substantially. The 4Q21 specialty DRAM price decline was also comparable to that of mainstream products, in turn impacting the revenue performance of Taiwanese manufacturers focused mainly on the consumer market. From the perspective of Nanya Tech, the combination of falling volume and price reduced its revenue in 4Q21 by approximately 10%, while its operating profit rate fell to 37.5% due to the decline in price quotations. Winbond’s small-capacity (1/2Gb) market was also affected by components mismatch issues, but the impact was relatively small and its 4Q21 revenue fell slightly by close to 4%. PSMC’s (revenue calculation is primarily based on its self-produced standard DRAM products and does not include its DRAM foundry business) revenue fell slightly by approximately 1%. If its foundry revenue is added, then its revenue grew by 6%, reversing a downward trend. This demonstrates that locking-in long-term contracts early is a good strategy.

Faced with reversal in the DRAM market, it is TrendForce’s understanding that the solutions of the three major Taiwanese manufacturers are as follows: Nanya Tech can allocate 20nm production capacity to produce DDR3 (better gross profit) when DDR4 market conditions are poor and invest more resources in the research and development of new 1X nm processes.  If yield improves rapidly, this will provide some contribution before the completion of its new factory in 2024. In addition to continuing to focus on niche small-capacity products, Winbond is also strengthening research and development of 25 nm and next-generation 20 nm products, expected to be introduced directly when its Kaohsiung Lujhu factory starts mass production. As for PSMC, by locking clients into long-term contracts, it can plan 2022 production in advance and continue to maximize its greatest advantages. In accordance with market conditions and gross profit levels, it will allocate production capacity between logic IC and memory products.

A fire occurred at ASML’s factory in Berlin, Germany on January 3, according to TrendForce’s investigations. ASML is the largest supplier of key equipment (including EUV and DUV) required for foundry and memory production. According to TrendForce’s preliminary inquiry, approximately 200m2 out of a factory floor covering 32,000m2 was affected by the fire. This factory primarily manufactures optical components used in lithography systems such as wafer tables, reticle chucks, and mirror blocks. Reticle chucks used for affixing photomasks are in short supply. Currently, the majority of components produced at this factory go towards supplying EUV machines while the lion’s share of demand for these products come from foundries. If the fire delays component delivery, it cannot be ruled out that ASML will prioritize the allocation of output towards fulfilling foundry orders.

Lead time for this exclusive supply of key EUV machines has been long and may affect the timeframe of advanced manufacturing process transition  

In terms of foundries, EUV is primarily used in advanced manufacturing processes smaller than the 7nm node. Currently, the only companies in the world using this equipment for manufacturing are TSMC and Samsung including TSMC’s 7nm, 5nm, 3nm nodes, Samsung’s EUV Line (7nm, 5nm and 4nm) built in Hwaseong, South Korea, and 3nm GAA node. However, due to factors such as the shortage of global foundry production capacity and the active expansion of manufacturing, semiconductor equipment lead times are also stretching further into the future.

In terms of DRAM, Samsung and SK Hynix are already using EUV in their 1Znm and 1alpha nm processes, while US manufacturer Micron is expected to introduce EUV to their 1gamma nm process in 2024. According to TrendForce’s current information, the lead time on ASML EUV equipment is approximately 12 to 18 months. Due to this long equipment lead time, ASML is at liberty to wait for the completion of replace components for those lost in the fire during the time necessary for equipment assembly.

Overall, the ASML Berlin factory fire will have a greater impact on the manufacturing of EUV lithography equipment when it comes to foundries and memory. According to TrendForce’s information, it cannot be ruled out that ASML will obtain necessary components from other factory campuses. In addition, the current lead time for EUV equipment is quite long. Therefore, the actual impact on EUV supply remains to be seen.

For more information on reports and market data from TrendForce’s Department of Semiconductor Research, please click here, or email Ms. Latte Chung from the Sales Department at lattechung@trendforce.com

Demand for NAND Flash products will undergo a noticeable and cyclical downward correction in 1Q22 as major smartphone brands wind down their procurement activities for the peak season and ODMs prepare for the New Year holidays, according to TrendForce’s latest investigations. As such, the NAND Flash market will remain in an oversupply situation, with prices continuing to undergo downward corrections accordingly. However, PC OEMs have been reinstating certain orders for client SSDs since early November in response to improvements in the supply of upstream semiconductor materials. By fulfilling these orders, suppliers are able to keep their inventory level relatively low, meaning they are not under as much pressure as previously expected to reduce inventory by lowering prices. Taking these factors into account, TrendForce expects NAND Flash ASP to undergo a 10-15% QoQ decline in 1Q22, during which NAND Flash prices will experience the most noticeable declines compared to the other quarters in 2022.

Regarding the price trend of NAND Flash products across the whole 2021, TrendForce further indicates that suppliers have actively transitioned their output to higher-layer technologies, resulting in a bit supply growth that noticeably outpaces demand, though the tight supply of components such as controller ICs and PMICs has constrained the production of NAND Flash end-products. Hence, the decline in contract prices of NAND Flash products has not been as severe as previously expected. Moving ahead to 2022, however, the supply of relevant components is expected to gradually improve, so the market for various NAND Flash products will also likely shift towards a noticeable oversupply. As a result, prices of NAND Flash products will steadily decline before the arrival of the peak season in 3Q22.

Client SSD prices will maintain a downward trajectory in 1Q22, by about 5-10% QoQ

While PC OEMs aggressively push out shipments in 4Q21, demand also remains strong for commercial notebooks, in turn propelling the overall volume of notebook production for 4Q21 to 3Q21 levels, surpassing prior expectations. Moving into 1Q22, however, notebook demand from the consumer segment and education segment is expected to moderate, and client SSD buyers’ procurement activities for the quarter will therefore become more conservative. Suppliers, on the other hand, continue to shift the bulk of their client SSD output to 128L and higher layer products as they release the next generation of client SSDs to both capture market share and increase the consumption of these higher-layer products. The average storage capacity of client SSDs will expand to 567GB next year, with WD releasing QLC products alongside existing QLC manufacturers Intel and Micron, in turn intensifying suppliers’ pricing competition. TrendForce therefore expects contract prices of client SSDs to maintain their existing downward trajectory and undergo a 5-10% QoQ decline in 1Q22.

Prices will decrease by about 3-8% QoQ for PCIe enterprise SSDs but hold flat for SATA enterprise SSDs

North American hyperscalers saw their inventory levels rising throughout the fourth quarter as their production capacities for servers were negatively affected by component gaps. In addition, some of these issues are expected to persist in 1Q22, so server shipment for the 4Q21-1Q22 period will experience continued declines, thus putting downward pressure on the growth of enterprise SSD bit demand. As for the supply side, not only has the issue of insufficient PMIC production capacity become gradually alleviated, but hyperscalers have also cut down on their enterprise SSD orders somewhat due to their focus on inventory reduction. Hence, the production capacities for enterprise SSDs with PCIe interface have slowly returned to normal, and room for price negotiations with suppliers is also beginning to surface. Regarding enterprise SSDs with SATA interface, their supply has become relatively tight because manufacturers prioritize the production of high-density PCIe SSDs over SATA SSDs, which feature an older interface and lower density. As such, contract prices of SATA SSDs are unlikely to drop. For 1Q22, TrendForce forecasts an overall 3-8% QoQ decline in enterprise SSD prices, with contract prices of SATA enterprise SSDs mostly holding flat and prices of PCIe products declining by 3-8% QoQ.

eMMC prices will decrease by 5-10% QoQ

TVs, Chromebooks, and other categories of consumer products that carry eMMC solutions have been experiencing sluggish demand in the second half of this year as related subsidies and tenders in the US wind down. The seasonal fluctuations of the demand for consumer products will return to the pre-pandemic pattern next year. Chromebook production is forecasted to show a small rebound in 1Q22 and climb to the year’s peak in 2Q22 in accordance with the traditional seasonal pattern. Even so, the annual total Chromebook production for 2022 will still register a significant decline from the previous year. Turning to TV production, a QoQ decline is projected for 1Q22. Taking account of these demand-related projections, TrendForce expects the demand for eMMC solutions to be fairly weak in 1Q22. The overall production capacity for low-density 2D NAND Flash products has remained relatively constant. Some suppliers continue to scale back 2D NAND Flash production capacity, but they have slowed down the pace of reduction. Regarding the price trend of eMMC solutions, it is now adjusting downward to a stable level after the surge in 2Q21. TrendForce forecasts that contract prices of eMMC solutions will drop again by 5-10% QoQ for 1Q22.

UFS prices will decrease by 8-13% QoQ due to rising supply and falling demand

Component gaps in the upstream sections of the supply chain are still a serious issue affecting smartphone brands’ device production. Despite the contribution from the traditional peak shipment season in the second half of the year, the YoY growth rate of the total smartphone production in 2021 is expected to once again fall short of earlier projections. Looking ahead to 1Q22, Apple is expected to scale back its smartphone-related demand due to seasonality. This, in turn, will negatively affect NAND Flash suppliers’ bit shipments and further weaken mobile storage demand as a whole. The latest examination of product shipments from NAND Flash suppliers indicates that 1XX-L technologies are now mainstream, and 1YY-L technologies will gradually be adopted during 1H22. Micron has skipped 128L in its stacking technology migration and thereby advanced from 96L directly to 176L. To lower production cost and raise bit output, suppliers continue to increase the layer number of their 3D NAND technologies. This means that supply growth will further outstrip demand growth in 1Q22 as the off-season sets in. Hence, TrendForce forecasts that prices of UFS solutions will also register steeper QoQ declines of 8-13% for 1Q22.

NAND Flash wafer prices will decrease by 10-15% QoQ as oversupply becomes more severe

Sales of retail storage products such as UFDs and memory cards have been weak through this entire year. The promotional activities initiated by e-commerce companies for the special events and festivals near the end of the year have generated only a marginal amount of demand. Looking ahead to the early part of 2022, the demand for retail storage products is not expected to gain noticeable momentum before the arrival of Lunar New Year holiday. Additionally, the cryptocurrency market has been energetic, so the demand for graphics cards from cryptocurrency miners has been outpacing supply for the most part. This development has been impacting shipments of DIY PCs and thereby suppressing the demand for retail client SSDs during 2021. In sum, the aforementioned factors have significantly impeded the consumption of NAND Flash wafers. In view of the demand situation in the different application segments, NAND Flash suppliers will likely ramp up wafer shipments to prevent excess inventory. Moving into 1Q22, even if there is sustained demand for storage components in the PC and server segments, smartphone-related demand will shrink further and exacerbate the oversupply situation of the NAND Flash wafer market. TrendForce forecasts that contract prices of 3D NAND Flash wafers will fall by 10-15% QoQ. Among the various NAND Flash products, 3D NAND Flash wafers will suffer the sharpest price drop. It is worth noting that the growing gap between supply and demand is already exerting considerable pressure on some suppliers, so there is a possibility that suppliers could begin dumping products earlier than expected at the end of this year. Such development could help moderate the magnitude of the price downtrend in 1Q22.

For more information on reports and market data from TrendForce’s Department of Semiconductor Research, please click here, or email Ms. Latte Chung from the Sales Department at lattechung@trendforce.com